If you hate the aggravation of properly
identifying industrial transmissions and engines, then youíre going
to love Joseph Industries!
Product Line Brochure
About Joseph Industries
Reman Torque Converters
Your Advantages with
Save money, buy direct
Reasonable and fair warranty policies with
liberal labor allowances
Ready-to-Ship reman components for popular
Repair and Return service of your components
Largest selection of overhaul kits
Reduce your freight expense using our carrier
Expert technical support
We track your core credits so you don't lose
Centralized billing for your multiple
Management of your reman program through your
Failure analysis and engineering services to
original equipment manufacturers
If you work on only one type and brand of equipment, you
normally know all of the specific part numbers that you need and
parts ordering is relatively easy. However, keeping your shop full means bringing in multiple types
and brands of equipment - some of which youíve never worked on
before. When working on unfamiliar equipment, you normally donít
have the necessary breakdowns or specific part numbers at your
disposal. This means you will be relying on someone else to
provide you with the correct parts and services.
When repairing industrial transmissions, engines and torque
converters, itís well known that you can rely on Joseph
Industries to provide you with the quality parts and services
you need and deserve. In most cases, the knowledge weíve
gathered over the last 60 years allows us to quote you cost
effective parts and services quickly and accurately, thus saving
you money and time.
There are many types, brands and variations of
equipment (see our brand selection below), so you will need to furnish information that
will provide us the necessary details for proper identification and quoting. Joseph Industries
will guide you with identification questions when
you order parts and services for equipment you arenít
intimately familiar with.
The first question youíll probably be asked is "What is the
make and model of the actual equipment?". On most equipment,
this information will appear on the vehicle data plate which is
mounted in full view, usually near the operator position. Some
equipment will also have this information located on the frame. If you can locate the vehicle service manual, it usually
has the vehicle identification plate location listed, as well as
the actual information you need. On most occasions, having this
allow us to quickly and correctly identify and quote
the parts you need.
If itís a transmission, engine or torque converter related
repair or replacement, the make and model of
the equipment alone wonít always provide enough information for a proper quote.
Sometimes there are internal and external
differences that are not obvious. Our experience will help you overcome these potential
hazards and will increase your chance of ordering
the correct part.
Transmission and engine identification is
not always easy, but by working together
we can help you succeed. We do believe youíll agree that the
time and money you save, along with the satisfaction you
gain when the proper item is received, is infinitely more
enjoyable than the alternative. Joseph Industries is here
The following link will give you more details about
identifying transmissions and engines.
Joseph Industries has over 60 years of engine,
transmission and torque converter remanufacturing excellence for:
Material Handling Equipment
Our offerings include the following
The Joseph Difference
Joseph Industries takes pride in helping you extend the life of
your material handling, construction and agricultural
equipment! Over 60 years of remanufacturing expertise means that we
can help you get your equipment back in service fast! We stock many
popular industrial torque converters, transmissions, engines and
overhaul kits for immediate shipment. If we do not stock the item
you need, you can send us your unit on a remanufacture and return
basis and we will have it back to you, like new.
Our industrial products are remanufactured to exacting standards
to provide superior performance.
Joseph Tech Tip:
When installing transmissions and engines, or just
replacing the torque converter, itís always a good idea to check the
engine crank thrust to insure it is within specifications. If it is
out of specification, it can cause damage to the flex plate and
torque converter, as well as the transmission pump.